Firmware 2.0.0 · Z-Wave Long Range

Long Range QR code.

Inserts sold with firmware 1.x carry a QR code that doesn't mention Long Range, so Home Assistant never offers it. Once your insert runs firmware 2.0.0, this page makes a Long Range version of its code for you to scan.

Works in your browser · nothing is uploaded

Read the label

Take a photo of the QR code on the insert's label (or the copy on its box), or paste the code's digits if a scanner app has read it for you.

If the photo button does nothing (some apps' built-in browsers block it), open this page in your phone's browser, or point your phone's camera app or Google Lens at the label's QR code, copy the text it shows, and paste it here.

Check it

Waiting for a QR code.Add a photo or paste the digits above.

Add it to Home Assistant

  1. Update the insert to firmware 2.0.0 first. Older firmware can't join over Long Range.
  2. Remove the insert from Home Assistant if it's already added: start removing a device, then hold the insert's button for 5–10 seconds until the LED turns blue, and let go.
  3. Select Copy code above. Then in Home Assistant go to Settings › Devices & services › Z-Wave › Add device. When the QR scanner opens, choose More options, pick the option to enter a QR code, and paste. (On another device, you can scan the code shown above instead.)
  4. Choose Long Range when Home Assistant asks. You need a Long Range-capable Z-Wave controller (an 800-series stick).
  5. Set up the insert's settings and automations again.

On Long Range the insert reports only to the hub: association groups, and settings that send commands straight to other devices, aren't offered. To keep it on standard mesh, use the original label instead.